manualshive.com logo in svg

Sailor 250 FleetBroadband, User Manual, Page: 112 / 288

Share
Download
Sailor 250 FleetBroadband User Manual Download Page 112

Chapter 4:  Using the web interface

96

Using the Call log

Using the Call log

Information on total usage

To enter the CALLS page select 

CALLS

 from the left navigation pane. This page 

contains information on usage for circuit-switched connections.

The listed information includes:

•

time connected using Standard Voice and 

•

time connected using 3.1 kHz Audio.

Note

If power to the system is interrupted, the information on the 
currently ongoing calls (connection time) and data sessions 
(transferred data) cannot be saved. This could mean that the airtime 
and bandwidth usage registered in the Call log will be inaccurate 
and there is a risk of being charged for more airtime than registered 
in the web interface.

Summary of Contents for 250 FleetBroadband

































































































































































































































































































Reviews:

No comments