Sailor 250 FleetBroadband, User Manual, Page: 62 / 288

Chapter 3: Operating the system
46 Using a phone or fax machine
• Phone/Fax. Select the call type for each port in the web interface under
SETTINGS > Phone/Fax . For further information, see Configuring the
Phone/Fax interface on page 114.
• IP handset . Select the call type for each handset in the web interface under
SETTINGS > IP Handset > Call settings . For further information, see Setting
the call types for IP handsets on page 132.
Overriding the default outgoing call type
To override the default setting for a specific outgoing call, do as follows:
• To use Standard Voice for the call,
dial 1* before the number.
• To use 3.1 kHz Audio for the call,
dial 2* before the number.
Example: To make a call to Thrane & Thrane in Denmark (+45 39558800),
forcing the connection to use Standard Voice, dial
1* 0045
39558800 followed by # if calling from an analogue or ISDN phone,
or off-hook key if calling from an IP handset.
Note
This will not change the default call type, only the type used for the
ongoing call.