manualshive.com logo in svg

Sailor 250 FleetBroadband, User Manual, Page: 54 / 288

Share
Download
Sailor 250 FleetBroadband User Manual Download Page 54

Chapter 2:  Getting started

38

Standard connection to the Internet (default)

Activating the connection using the Thrane IP Handset (only handset 
number 0501)

To activate the connection using the Thrane IP Handset, do as follows:

1. Connect the Thrane IP Handset to one of the LAN ports (preferably port 1).

The handset starts up automatically.

2. Select 

Menu > BGAN

 in the handset.

3. Select 

Connect

.

4. Use the left/right keys to find the network user group for the application 

you want to start.

5. Press 

Start

 to start the connection.

A confirmation window is displayed. 

6. Press 

Yes

 to continue.

The Thrane IP Handset sends a command to the terminal to start the 
selected connection.

7. Check the connection, e.g. by entering a web site from a connected 

computer.

Summary of Contents for 250 FleetBroadband

































































































































































































































































































Reviews:

No comments