Sailor 250 FleetBroadband, User Manual, Page: 51 / 288

Chapter 2: Getting started
Making the first call 35
2222
Gett
ing s
tar
te
d
Making the first call
When the Antenna and Terminal indicators in the LED panel on the terminal
both light steady green, you are ready to make or receive the first call. The
following sections provide a short guide to making calls. For more detailed
information, see
Making or receiving a phone call on page 48.
Making a call from the terminal
To make a call from a phone connected to the terminal, dial
00 <country code> <phone number> followed by # or off-hook key.
Example: To call Thrane & Thrane in Denmark (+45 39558800) from an
analogue phone, dial
00 45 39558800 #
Making a call to the terminal
To make a call to a phone connected to the terminal, dial
+ <Mobile number>
• + is the international call prefix
1
used in front of the country code for
international calls.
Note
By default all phones connected to the terminal will ring on
incoming calls. However, you can configure the behaviour of the
interfaces using the web interface (see the relevant interface in
Setting up the interfaces on page 106). You can also set up a local
exchange function in the terminal so that you can call a specific
phone connected to the terminal. See
Setting up the local exchange
function on page 128.
1. The plus sign indicates the code required to dial out of one's country code area,
such as 00 in most of Europe, 011 in the United States, and other short codes in
other parts of the world.