Sailor 250 FleetBroadband, User Manual, Page: 127 / 288

Chapter 4: Using the web interface
Setting up the interfaces 111
4444
Usin
g the web in
te
rf
ac
e
If you do not know the IP address, you can look it up in the DASHBOARD of the
web interface under ONGOING DATA SESSIONS .
Enabling PPPoE (Point-to-Point Protocol over Ethernet)
What is PPPoE
By using PPPoE, users can virtually “dial” from one machine to another over
an Ethernet network, establish a point to point connection between them and
then securely transport data packets over the connection.
On the equipment connected to the SAILOR FleetBroadband terminal you must
enter a few settings for your PPPoE connection. For example you need to set
up which service to use and possibly a user name and password. For details,
refer to
Using PPPoE (Point-to-Point Protocol over Ethernet) on page 74 and to
the documentation for your connected equipment.
On the SAILOR FleetBroadband terminal you must enable PPPoE before you
can establish a PPPoE connection. Refer to the next section.