Sailor 250 FleetBroadband, User Manual, Page: 53 / 288

Chapter 2: Getting started
Standard connection to the Internet (default) 37
2222
Gett
ing s
tar
te
d
Standard connection to the Internet (default)
By default, the terminal does not automatically connect to the Internet when
you connect your computer or other equipment to the LAN interface. You must
activate your connection from the Dashboard in the web interface or from the
Thrane IP Handset with local number 0501 (master handset).
Activating the connection from a computer (web interface)
To activate the connection from a connected computer, do as follows:
1. Access the web interface by opening your browser and entering
http://ut.bgan or the IP address of the terminal in the address bar.
“http://ut.bgan” translates into the IP address of the terminal (if your
computer is set up as described in
Before connecting to the LAN interface
on page 27). The default IP address is 192.168.0.1.
2. Click Start Standard under PROFILES ON LAN at the bottom of the page.
3. Check the connection, e.g. by entering a web site.
The field ONGOING DATA SESSIONS will show the IP address for the data
session you started.
Note
This section only describes a Standard Internet connection with
default settings on the terminal. For information on other scenarios,
see
Connecting to the Internet on page 68.