RTR-4 Operator’s Manual
System Operation
120300 Rev. D
SAIC Proprietary
4-15
2
Click on a vertical blue bar to change the image
brightness. The bar will flash a different color when
properly selected.
3
Move the cursor to the left or right to vary the
brightness of the image. Notice the selected blue bar
moves as the cursor moves, adjusting the brightness
of the image in the active buffer.
4
Click the blue bar again to stop the bar from moving.
NOTE
Selecting and moving either the left or right vertical
blue bar will vary the brightness of the image.
Depending on the distribution of the density graph,
one may have more affect than the other. The
operator should try both until satisfied with the
image display. To change the contrast of the image,
continue this procedure.
5
Place the cursor in the space between the vertical
bars and click. Both bars will flash.
6
Move the cursor left or right to adjust the contrast.
7
When satisfied with the contrast setting, click
between the vertical bars again.
8
To close the dialog box either click the
OK
button to
keep the changed settings or click the
Default
button to return to the original settings.
STEP
ACTION
RTRooo7c