manualshive.com logo in svg

SAIC RTR-4, Operator'S Manual, Page: 37 / 116

Share
Download
SAIC RTR-4 Operator'S Manual Download Page 37

120300 Rev. D

March 3, 2003 12:01 pm

4-1

4  System Operation

Introduction

This chapter describes how to operate the Standard RTR-4 

system in both wired and wireless modes and contains the 

following sections:

• Operating the RTR-4.
• Image Processing.
• Image Preservation.
• Software Description.
• Shutting Down and Stowing the RTR-4.
• Operator Maintenance.

Operating the RTR-4

Acquiring an X-Ray Image

Description

Follow this procedure to X-Ray an object.

Prerequisites

Verify the following prerequisites are completed before beginning 

this procedure: 

• The RTR-4 is configured in accordance with the applicable 

setup procedure in the previous chapter.

• The Source and Imager units are correctly positioned around 

the item to be X-Rayed and the source Safety Keyswitch has 

been turned 90° clockwise.

• The RTR-4 imaging software has been properly configured and 

is initiated and running. 

Summary of Contents for RTR-4





















































































































Reviews:

No comments