System Description, Setup, and Quick Start
RTR-4 Operator’s Manual
3-6
SAIC Proprietary
120300 Rev. D
Imager Control Panel
Operation and interconnection of the imager with the rest of the
RTR-4 system in the wired configuration is accomplished through
a control panel at the side of the imager.
Red
TEMPERATURE FAILURE,
battery is too
hot or too cold for safe charging. The battery
should be brought to operating temperature.
On steady.
Green
Off.
Red
FAILURE,
battery is physically damaged, do
not use, discard battery.
On.
Green
On.
Red
FAILURE DURING INITIATION
If the red LED light up when the charger is
plugged in, the charger is not ready for use.
Contact your nearest dealer.
LED
INDICATION
POWER
SWITCH
POWER
ON LED
BATTERY
CHARGE
LED
DATA
CONNECTOR
X-RAY
CONNECTOR
POWER ON
DELAY
TIMER
EXT. PWR
CONNECTOR
BATTERY
TRIGGER