RTR-4 Operator’s Manual
System Operation
120300 Rev. D
SAIC Proprietary
4-13
Adding Lines and Text
Description
The RTR-4 imaging software has provisions to allow the operator
to place lines and text on an image to highlight or point out
certain areas. Follow this procedure to add lines and text to an
image.
Prerequisites
Verify the following prerequisites are completed before beginning
this procedure:
• The RTR-4 imaging software has been properly configured and
is loaded and running.
• An image is displayed in the
Original
buffer.
Procedure RTR0013
Add lines and text to an image as follows:
STEP
ACTION
1
To add text, select
Annotate>Text>Black
(or
White
) from the
Modify
pull-down menu.
The cursor changes to the text I-beam.
2
Move the cursor to where the text is to be added and
click. A text box appears.
3
Type in the desired text and then press
Enter
.
4
To add a line to the image, select
Annotate>Lines>Black (or White)
from the
Modify
pull-down menu.
The cursor changes to the crosshair symbol.
RTR0013a
RTR0013b