120300 Rev. D
SAIC Proprietary
2-1
2 Safety Summary
Introduction
This chapter lists and describes the safety issues applicable to the
standard configurations of the RTR-4. The summaries listed here
apply at all times and shall be strictly followed by all operators,
technicians, and observers.
Follow all warnings and instructions
The equipment and the procedures in this manual have warning
and caution labels and their relevant hazard type symbols.
Observe all warnings, cautions, and instructions marked on the
equipment and included in this manual and in all supporting
manufacturer documentation at all times.
Qualified and Trained personnel only
The RTR-4 should only be operated by technically qualified and
trained personnel. It is the responsibility of the RTR-4 user to
ensure only trained personnel are permitted to configure, operate,
and maintain RTR-4 equipment. It is the responsibility of the user
to verify that all regulations have been met before operating this
equipment.
Symbols
In procedural steps, specific warnings and cautions are placed
immediately prior to the step(s) to which they apply. Specific
warnings and cautions have three parts:
• The specific hazard is stated.
• The correct action to be followed or performed is given.
• The consequences if the correct action is
not
followed are
stated.
The following warning symbols and the caution symbol are used
in this manual when warnings and cautions are placed into
procedural steps.