RTR-4 Operator’s Manual
System Description, Setup, and Quick Start
120300 Rev. D
SAIC Proprietary
3-15
Standard Wireless Configuration
In the Wireless configuration of the RTR-4 Imaging System, radio
components are used to interconnect the various components. The
basic wireless configuration is shown here.
Setting Up the Wireless Configuration
Description
Verify the following prerequisites are completed before doing this
procedure:
Use this procedure to setup the standard RTR-4 Imaging System
in the wireless configuration.
Prerequisites
Verify the following prerequisites are completed before beginning
this procedure:
• The RTR-4 components have been removed from their
transport cases.
• All needed batteries have sufficient charge or have been
recharged or replaced with new ones.
• A cleared, level workplace is available for setup and applicable
exclusion zone has been established.
WARNING
When the RTR-4 has been set up and is standing by
for imaging, ensure all personnel follow applicable
X-ray radiation safety distance recommendations for
field operation. Failure to comply may result in
personnel injury.
STEP
ACTION
IMAGER WITH
RADIO MODULE
SUSPECT
PACKAGE
RADIO
RECEIVER
CONTROLLER
WiFi
NIC
X-RAY
SOURCE
WITH