Safety Summary
RTR-4 Operator’s Manual
2-2
SAIC Proprietary
120300 Rev. D
Safety Procedures
The X-ray source used with the RTR-4 system generates x-rays
that can be harmful to personnel. It is the responsibility of the
operator to ensure that the RTR-4 is properly used by trained
personnel who follow recommended operating procedures and
SYMBOL
DEFINITION OF USE
The generic
Warning
symbol precedes a procedural
step or process which could lead to personnel injury
if not followed correctly. This symbol is used when
multiple hazard conditions may be present or one of
the symbols below does not specifically apply.
The
Electrical
,
High
Voltage
, or
High
Current
hazard warning symbol is used where the potential
for electrical shock may exist while performing a
specific task.
The
X-Ray
Radiation
hazard warning symbol is
used whenever emitted x-ray radiation may exceed
background levels during a specific procedure or
process.
The
Microwave Radiation
hazard
warning
symbol is used whenever emitted microwave/rf
radiation is present during a specific procedure or
process.
The generic
Caution
symbol precedes a procedural
step or process which could lead to equipment
damage if not followed correctly.
The
ESD
caution symbol precedes a procedural
step or process requiring use of standard approved
ESD damage control procedures to avoid harming
electronic components and circuit card assemblies.
The
Note
symbol indicates where additional or
clarifying information, commentary, sidelights, or
points of interest have been added to a procedure
either before or after the step to which it applies.