saia-burgess PCD7.D23 Series Manual Download Page 49

Page: 49 / 59

Saia-Burgess

Controls Ltd.

Manual PCD7.D23x│Document 26/795; Edition E7│15.04.2005

Handling

5-2

Setup menu

“Status Info”

allows to show the hardware and ﬁrmware version* and check RAM

and EEPROM.

*If a problem occures and in order to help you better , the “Technical Customer

Service” needs to know the hardware- and ﬁrmware-version of the terminal as well as

other information on the label sticks on the backside of the housing.

“Character Maps”

allows visualising 6 windows of character maps that you can use

with this terminal. (the 6 windows ﬂash automatically)

“Return”

allows to quit the window “show Information”

“Contrast setting“

(Read and Write)

PCD7.D230

“Contrast setting”

adjusts the contrast by turning the single knob to the left or right.

Press the single knob to save the setting.

PCD7.D231 and D232

“Contrast setting”

adjusts the contrast by pressing the up and down arrow keys

Press “enter” key to save the setting.

“Baudrate”

(Read and Write)

Summary of Contents for PCD7.D23 Series




























































Search results

Summary of Contents for PCD7.D23 Series

Reviews:

Related manuals for PCD7.D23 Series

Brands by name

Popular brands

saia-burgess PCD7.D23 Series, Manual

Search results

Summary of Contents for PCD7.D23 Series

Reviews:

Related manuals for PCD7.D23 Series

Brands by name

Popular brands