Saia-Burgess
Controls Ltd.
Manual PCD7.D23x│Document 26/795; Edition E7│15.04.2005
Use of the PCD7.D23x terminals for the whole PCD range
Quickstart
1-7
1
1.3
Use of the PCD7.D230, D231 or D232 as remote displays for the PCD
range
1.3.1 Configuration for one terminal
A - with RS 232
●
Use one port RS 232 (with Handshake)
PCD7.D23x setup (recommended):
(see also chapter 3)
Baudrate:
9600 or 19200 bps
Serial mode:
RS 232 RTS/CTS
Use of HMI-Editor V 1.3 (recommended):
Terminal type:
D230 with 8 x 20 (or D231 or D232)
Terminal topology:
single terminal
Serial line:
xx (port number)*
Type of serial line:
RS 232
Baudrate:
9600 or 19200 bps
Handshake:
RTS/CTS
*You can use the PGU port as RS 232 serial line. In this case, select PGU line: Yes.
Hardware connection:
Connection cable length: 2.5 m, between PCD and PCD7.D23x: PCD7.K423
��������������������
