saia-burgess PCD7.D23 Series Manual Download Page 51

Page: 51 / 59

Saia-Burgess

Controls Ltd.

Manual PCD7.D23x│Document 26/795; Edition E7│15.04.2005

Handling

5-4

Setup menu

Back to default

PCD7.D230

: By pressing the sinle knob, all parameters are restored.

PCD7.D231 and D232

: By pressing the “Enter” key, all parameters are restored.

(Default parameters: set contrast: middle / set baudrate: 9600 / serial mode RS 232

RTS/CTS)

“Enabled or disabled setup access”

The HMI-Editor allows to enable or disable the “setup access” to a terminal.

(allow setup “yes” or “no” in the settings Tab).

Setup is disabled (allow setup = no , in the settings Tab of the HMI-Editor)

Quit the setup and enter into the user program

There are 2 possibilities:

1) Select

“Quit setup”

on the

“Setup”

menu and press the single knob or press the

“enter key”

2) Switch the power off and on (without pressing the dial or any keys)

Summary of Contents for PCD7.D23 Series




























































Search results

Summary of Contents for PCD7.D23 Series

Reviews:

Related manuals for PCD7.D23 Series

Brands by name

Popular brands

saia-burgess PCD7.D23 Series, Manual

Search results

Summary of Contents for PCD7.D23 Series

Reviews:

Related manuals for PCD7.D23 Series

Brands by name

Popular brands