Saia-Burgess
Controls Ltd.
Manual PCD7.D23x│Document 26/795; Edition E7│15.04.2005
Hardware-System Overview
2
2-2
Technical data
Customising
A polyester foil with the type and the Saia-Burgess logo covers the whole front side.
Upon request:
●
Special labelling is available on request
●
Special design (own logo) can be realized and placed on the front-panel.
Both solutions are available for small quantities (minimum order 100 pieces and mini-
mum delivery 25 pieces) by extra charges.
●
Neutral versions (Z11) without Saia logo and type is also available
Hardware improvement between current PCD7.D230 and the new ones
●
Better visibility (transparent plastic instead of plastic film on front)
●
Frame around the front side (front dimensions 115 mm x 125 mm)
●
Logo and Saia reference more discreet on front
●
Buzzer
2.2
Technical Data PCD7.D230, D231 and D232
Type designation
PCD7.D230
PCD7.D231
PCD7.D232
Display
Type
Graphic Display
Display dimensions (w x h)
8 lines x 20 characters/128 x 64 Pixel (70 x 40 mm)
Character size (w x h)
5 x 7 (5 x 8) Pixel+cursor (2.52 x 3.54 mm)
Contrast adjustment
via software or setup
LED backlighting
on/off
Character sets
ASCII (basic set: 95 character), with as default the standard Wes-
tern-European character set (DOS graphical 437, 128 characters). An
added alternative enhanced Western und Central European character
set (128 characters) is selectable by software
Controls, LEDs
Single-knob control/keys
yes/-
-/10 (large)
-/25
Function keys
-
10
8
Numeric keypad
-
-
yes (12 keys)
LEDs
-
-
8 (6 red, 1 orange,
1 green)
Auto-repeat keys
-
yes
yes
Memory
Terminal storage capacity
Volatile storage for 100 symbols (18 x 16 pixels). Permanent storage
of communication and contrast settings. With advanced commands
(for other than HMI users):16 volatile background screens (120 x 64
pixels). Free to define character sets with up to 128 redefined charac-
ter pixel maps (with up to 18 x 24 pixels for each character code)
Redefined use of character codes over redefinition tables.
Interfaces
to the PCS1 and PCD
RS 232/RS 422/RS 485, 9-pole, D-type
Switch for line termination res.
yes
Performance and programming
Performance features
All performance features of PCD controllers are also available if with
them the terminals are used, such as: up to 8000 texts, data in any
format, alarm handling, password protection, real time clock
Programming software
HMI-Editor (integrated within PG5 as add-on tool)
General data
Supply voltage U
n
24 VDC, +30%/-20% or 19 VAC, ±15%, full-wave rectified
Power consumption on U
n
200 mA
Interference immunity
CE mark according to EN 50 081-1 and 50 082-2
