6- Advanced parameters
Page 6-116
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Field
Action/Meaning
Default
value
RX Chain Power
Save Quiet Time
The number of seconds the traffic must be below the PPS
value below before the Rx Chain Power Save feature
activates itself.
10
RX Chain Power
Save PPS
The maximum number of packets per seconds that can be
processed by the WLAN interface for a duration of Quiet
Time, described above, before the Rx Chain Power Save
feature activates itself.
10
Radio Power
Save
Enabling this feature turns off one of the Transmit chains.
Off
Radio Power
Save Quiet Time
The number of seconds the traffic must be below the PPS
value below before the Radio Chain Power Save feature
activates itself.
10
Radio Power
Save PPS
The maximum number of packets per seconds that can be
processed by the WLAN interface for a duration of Quiet
Time, described above, before the Radio Chain Power Save
feature activates itself.
1
54g
TM
Rate
In the scroll down list, select the transmission rate at which
the information (data or video) will be transmitted or received
on your wireless network (Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24,
36, 48 or 54 Mbps).
Note:
If you select "Auto", the information will be transmitted
at an optimised rate which takes account of the
transmission constraints.
Auto
Multicast Rate
From the scroll down list, select the transmission rate at
which the "Multicast" packets are transmitted (Auto, 1, 2, 5.5,
6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbps).
Note:
If you select "Auto", the information will be transmitted
at an optimised rate which takes account of the
transmission constraints.
Video conferencing and teleconferencing are "Multicast"
applications.
Auto
Basic Rate
From the scroll down list, select the basic rate at which the
information will be transmitted or received over your wireless
network (Default, All, 1 & 2 Mbps or 1 & 2 & 5.5 & 6 & 11 &
12 & 24 Mbps).
Default
Fragmentation
threshold
This packet fragmentation mechanism is used to limit errors
and repetitions.
It is recommended not to reduce the packet size too much to
avoid reducing the bandwidth.
Enter a threshold value (in bytes) between 256 and 2347.
2346
RTS Threshold
The RTS/CTS protocol (
R
equest
T
o
S
end /
C
lear
T
o
S
end) is
used to reduce the probability of collisions between stations.
Note:
As packet size is set by default to 2346, the RTS/CTS
protocol is inhibited as its value is set by default to
2347.
Enter a threshold value (in bytes) between 1 and 2347.
2347
DTIM Interval
Enter a time interval value between two beacon signals
which shows the activity of the wireless.
1
Summary of Contents for F@ST 2704R
Page 1: ...F ST 2704R Reference Manual...
Page 2: ......
