6- Advanced parameters
Page 6-60
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Field
Action
Filter Name
Enter a representative name for the filter.
IP Version
Select the dedicated IP version from the scroll down list (for
example: IPv4).
Protocol
Select the dedicated protocol from the scroll down list (TCP/UDP,
TCP, UDP, ICMP).
Source IP
address[/prefix
length]
Enter the Source IP address (WAN).
Source Port
(port or port:port)
Enter a "Source" port (WAN) or range of ports.
Note:
For one port, for example, enter 80.
For a range of ports, enter 80:90.
Destination IP
address[/prefix
length]
Enter the destination IP address (LAN).
Destination Port
(port or port:port)
Enter a "destination" port (LAN) or range of ports.
Note:
For one port, for example, enter 80.
For a range of ports, enter 80:90.
WAN interfaces
Field
Action
Default
value
Select All
Check the box to select all WAN interfaces.
Note:
By unchecking the box, no interface is selected
and the other WLAN/LAN interfaces displayed
boxes become unchecked.
Checked
pppoe_0_8_32/ppp1
Check the box to select the displayed interface.
Checked
br0/br0
Check the box to select the displayed interface.
Checked
6.4.6.2 MAC
Filtering
Object:
This menu is used to create IP filters to refuse data from the LAN to the WAN and list the existing
outgoing IP filters.
•
In the
Advanced Setup
menu, select
Security > IP MAC Filtering
Summary of Contents for F@ST 2704R
Page 1: ...F ST 2704R Reference Manual...
Page 2: ......
