6- Advanced parameters
Page 6-22
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6.4.2 WAN Service
Object:
This menu is associated with the remote network. It is used to display the list of all the configured
PVCs, and to add PVCs or remove them.
•
In the
Advanced Setup
menu, select
WAN Service
.
The following screen opens:
Field
Meaning
Interface
Name, allocated automatically, associated with the service name (for example, ppp0).
Description
Name of the ATM service. This name is made up as follows: Protocol_VPI_VCI_Index
For example: pppoe_0_8_32.
Type
Data
flow
encapsulation
mode.
Vlan8021p
a
Value of the 802.1P Priority.
VlanMuxId
a.
Value of the 802.1Q VLAN ID.
Igmp
Status (Enabled or Disabled) of the Igmp function.
Note:
This function enables the distribution of Multicast datagrams over the local
network (LAN) and interaction between the router and the local network hosts.
NAT
Status (Enabled or Disabled) of the NAT.
Firewall
Status (Enabled or Disabled) of the Firewall.
IPv6
Status (Enabled or Disabled) of the IPv6.
Mld
Status (Enabled or Disabled) of the MLD.
Remove
Check this box and clik on the [
Remove
] button to remove the selected object from
the list.
a. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX
Mode.
Summary of Contents for F@ST 2704R
Page 1: ...F ST 2704R Reference Manual...
Page 2: ......
