SAGEMCOM F@ST 2704R Reference Manual Download

Page: 168 / 223

6- Advanced parameters

Page 6-118

F@ST 2704R Reference Manual - 253526032-A

Sagemcom Broadband SAS document. Reproduction and disclosure prohibited

6.5.5 Station Info

Object:

This menu is used to display all the wireless stations certified, with their status.

•

In the

Wireless

menu, select

Station Info

The following screen opens:

•

Click on the

Refresh

button to refresh the screen.

Note

Only appear the MAC addresses (BSSIDs) of the computers associated with the
router and/or authorized by this one to use your wireless network (see subsection
6.5.3 - MAC Filter).

Summary of Contents for F@ST 2704R
































































































































































































































Search results

Summary of Contents for F@ST 2704R

Reviews:

Related manuals for F@ST 2704R

Brands by name

Popular brands

SAGEMCOM F@ST 2704R, Reference Manual

Search results

Summary of Contents for F@ST 2704R

Reviews:

Related manuals for F@ST 2704R

Brands by name

Popular brands