SAGEMCOM F@ST 2704R, Reference Manual

Page: 148 / 223

Page 6-98 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6- Advanced parameters
6.5.1.1 Wireless - Basic
Field Action/Meaning Default value
Enable Wireless
Check the box to activate the wireless network (Wi-Fi).
Note: The steady " Wi-Fi " LED on the front of the router shows
that the wireless network (Wi-Fi) is activated.
Checked
Hide Access Point
Check the box to mask the broadcast of the SSID and prevent
any unwanted Wi-Fi user to connect on your router.
Note: When this box is checked, the router's SSID is absent
from the Wi-Fi adaptor user's own list of monitored sites
(Access Point).
Not checked
Clients isolation
Check the box to select the desired state:
• Disabled : do not isolate the A ccess P oint i.e. authorise
machines connected to the router to communicate with each
other.
• Enabled : isolate the A ccess P oint, i.e. prohibit machines
connected to the router to communicate with each other.
Not checked
Disable WMM
Advertise Check the box to disable Wi-Fi Multimedia feature (Not used
here). Not checked
Enable Wireless
Multicast
Forwarding (WMF) Check the box to enable multicast frames forwarding over
wireless. Not checked
SSID
Enter your router's SSID.
Note: This is indicated on the label stuck to the box.
SAGEMCOM_3
325
BSSID
This is the MAC address of the router's Wi-Fi interface (Access
Point). In the "Structure" mode, this address identifies a cell
(BSS in English
B asic S ervice S et). This cell is a set formed by
the access point and the stations located in its coverage area.
You cannot modify this setting.
[Non
modifiable]
Country Select the country of your choice from the scroll down list. FRANCE
Max Clients Maximum number of wireless customers for your router. 16
Note
The router may or may not be secured, at the request of the customer. This level of
security is indicated on the label pasted to the box.
This choice will modify the Wireless configuration screen.