6- Advanced parameters
Page 6-48
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Field
Action
Default value
Enable DHCP
Check this box to activate your router's DHCP server.
Note:
You must configure your computer as DHCP client and
DNS client (or enter the primary and secondary DNS
server addresses).
Checked
Start IP Address
Enter the first address attributed by your router's DHCP server.
192.168.1.2
End IP Address
Enter the last address attributed by your router's DHCP server.
192.168.1.254
Leased Time (hour)
Enter an unavailability time (in hours) for each attributed
address.
24
Static IP Lease List
Enter if required the list of static IP Lease.
Note:
A maximum of 32 entries can be configured.
-
Configure the
second IP Address
and Subnet Mask for
LAN interface
Check the box to configure the IP parameters (IP address,
subnet mask) of a second address for the local network (LAN).
Not checked
IP Address
b
Enter a second address for your local network (LAN).
-
Subnet Mask
b.
Enter a subnet mask for the second address for your local
network (LAN).
-
a. These fields only appear when the "Enable IGMP Snooping" field is activated (box checked).
b. These fields only appear when the "Configure the second IP Address and Subnet Mask for LAN interface"
field is activated (box checked).
6.4.4.1 IPv6
Autoconfig
Object:
This is used to cauto-configure IP v6 protocol.
•
In the
Advanced Setup
menu, select
LAN
then select
IPv6 Autoconfig
.
The following screen opens:
Summary of Contents for F@ST 2704R
Page 1: ...F ST 2704R Reference Manual...
Page 2: ......
