6- Advanced parameters
Page 6-24
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6.4.2.2 Ethernet over ATM – PPP over Ethernet (PPPoE)
•
Select the WAN service type
PPP over Ethernet (PPPoE)
.
Field
Action
Default value
Enter Service
Description
Displays the name of the service being configured. This
name, which is allocated automatically, is made up as
follows: Protocol_VPI_ Index _ VCI
For example: pppoe_eth0.
Note:
You may enter another service name.
pppoe_eth0
Enter 802.1P Priority
a
Enter a value for the 802.1P Priority. This value is
between 0 and 7.
-1
Enter 802.1Q VLAN ID
a.
Enter a value for the 802.1QVLAN ID. This value is
between 0 and 4094.
-1
Network Protocal
Selection
Select the type of network from the drop-down list:
•
IPv4 Only
•
IPv4&IPv6 (Dual Stack)
IPv4 Only
a. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX
Mode.
Summary of Contents for F@ST 2704R
Page 1: ...F ST 2704R Reference Manual...
Page 2: ......
