SAGEMCOM F@ST 2704R Page 169 Reference Manual Download

Page: 169 / 223

6- Advanced parameters

F@ST 2704R Reference Manual - 253526032-A

Sagemcom Broadband SAS document. Reproduction and disclosure prohibited

Page 6-119

6.6 Multimedia

Object:

This menu is used to activate or deactivate the options of the multimedia interface of the router.

This section contains the following subtitles:

•

Print Server (see subsection 6.6.1)

•

Storage Service (see subsection 6.6.2)

6.6.1 Print Server

Object:

This menu allows you to enable/disable printer support of the router.

•

Select the

Multimedia

menu, then select

Print Server

•

Check the box to enable the print server of the router.

•

Click on the

Apply/Save

button to save the parameters.

Summary of Contents for F@ST 2704R
































































































































































































































Search results

Summary of Contents for F@ST 2704R

Reviews:

Related manuals for F@ST 2704R

Brands by name

Popular brands

SAGEMCOM F@ST 2704R, Reference Manual

Search results

Summary of Contents for F@ST 2704R

Reviews:

Related manuals for F@ST 2704R

Brands by name

Popular brands