Parameters in the file para.ini: advanced configuration
SAGEM RT3000
97
Datei 8115AD002-Total.doc
Datei gespeichert
24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04,
18:17
Status Release
16.19 Voice signal volume on Telephone and Fax/Modem/Phone
port
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Can be configured by DTMF (see page 80)
You can adjust the voice signal volume on the
Telephone
and
Fax/Modem/Phone
port by modifying the following parameters
.
If you set the parameter value to “0” you
get the loudest signal.
CHx_TX_VOICE_LEVEL (Signal directed to the remote station)
CHx_RX_VOICE_LEVEL (Signal directed to your local equipment)
You can set the parameter for both ports separately.
Section: DIALING
Meaning Parameter
Permitted
Values
Factory Setting
Tx Level *(-1)[dB]
on port A
CHA_TX_VOICE_LEVEL
0 down to –20
-7
Rx Level *(-1)[dB]
on port A
CHA_RX_VOICE_LEVEL 0 down to –20
-7
Tx Level *(-1)[dB]
on port B
CHB_TX_VOICE_LEVEL
0 down to –20
-7
Rx Level *(-1)[dB]
on port B
CHB_RX_VOICE_LEVEL 0 down to –20
-7
16.20 Telephone and Fax/Modem/Phone port impedance
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
You can adjust the input impedance of the
Telephone
and
Fax/Modem/Phone
port
separately. You can select 600R, 900R or a complex matching.
Section:
DIALING
Parameter
Permitted Values
Factory Setting
Input Impedance
Port A
CHA_INPUT_IMPEDANCE REAL600,
REAL900,
COMPLEX
COMPLEX
Input Impedance
Port B
CHB_INPUT_IMPEDANCE REAL600,
REAL900,
COMPLEX
COMPLEX
