Parameters in the file para.ini: advanced configuration
96 SAGEM
RT3000
Datei 8115AD002-Total.doc
Datei gespeichert
24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04,
18:17
Status Release
Section:
DIALING
Meaning Parameter
Permitted
Values
Factory Setting
Fast Dialling Port A
CHA_FAST_DIAL
YES, NO
NO
Dial timeout in 10ms
CHA_DIAL_TIMEOUT
600
Fast Dialling Port B
CHB_FAST_DIAL
YES, NO
NO
Dial timeout in 10ms
CHB_DIAL_TIMEOUT
600
16.17 Call Wait Tone On/Off
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
Can be configured by DTMF (see page 80)
Calls that come in during an active connection can be signalled by the Call Wait
Signal. This function can be switched on or off for both ports separately.
When activated this function can only take effect when it is supported by the network
and your subscription.
Section:
DIALING
Meaning Parameter
Permitted
Values
Factory Setting
CallWait tone
generated on port A
CHA_LOCAL_CALL_WAIT YES,
NO
NO
CallWait tone
generated on port B
CHB_LOCAL_CALL_WAIT YES,
NO
NO
16.18 Local Ringback tone on/off
Can be configured by SMS (see page 82)
Can be configured by FTP (see page 83)
The Ringback tone is the tone you can hear when making a call after you have dialled
the telephone number and when the called remote station is ringing. By default this
tone will be generated by the network. If you want that the Ringback tone is generated
by the SAGEM RT3000 set the following parameter to YES:
CHx_LOCAL_CALL_CTRL=YES.
Section:
DIALING
Meaning Parameter
Permitted
Values
Factory Setting
Local RingBack
generated
CHA_LOCAL_CALL_CTRL YES,
NO
NO
Local RingBack
generated
CHB_LOCAL_CALL_CTRL YES,
NO
NO