Configuration
SAGEM RT3000
37
Datei 8115AD002-Total.doc
Datei gespeichert
24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04,
18:17
Status Release
Meaning:
TTTT
= the duration of the time out :
Min value =
400
: 400 * 10 ms = 4 s
Max value =
1200
: 1200 * 10 ms = 12 s
Recommended value: 600 (= 6 s)
Option: If activated you can stop the dial timeout by pressing
#
after the last entered
digit of the phone number (fast dialling key). (Default: Not activated; to activate this
function please check the User manual)
8.7.3
Flash signal detection (used to manage two calls
simultaneously)
The RT3000 is capable to detect the so called Flash signal.
On most telephone sets the Flash signal is sent by pressing the
R
key. In some
seldom cases the length of the Flash signal of a telephone differs from the standard the
SAGEM RT3000 is configured for by default. If the SAGEM RT3000 does not detect
the Flash signal of your telephone in the right way please adjust the setting of the
SAGEM RT3000 using the following DTMF codes:
For the Telephone port:
Description:
*5
ACCESS
014
MIN
#
Minimum duration
*5
ACCESS
015
MAX
#
Maximum duration
For the Fax/Modem/Phone port:
Description:
*5
ACCESS
016
MIN
#
Minimum duration
*5
ACCESS
017
MAX
#
Maximum duration
Meaning:
All Flash signals with a duration >
MIN
and <
MAX
will be detected.
With
MIN
=
7
....
55
: that means 70 ms .... 550 ms
With
MAX
=
12
....
65
: that means 120 ms .... 650 ms
Default access code:
000000
Default access code:
000000
