Operation: Making and answering telephone calls
SAGEM RT3000
15
Datei 8115AD002-Total.doc
Datei gespeichert
24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04,
18:17
Status Release
4.4
Option: Having two calls at the same time
!
During making a telephone call it is possible to receive a second call or to establish
a second call, if this service is supported by:
- the network
- and your subscription
- and if configured (see
Call waiting
, page 30).
By default this function is not activated.
To establish a
second call...
To put the call already established in Call Hold
state press the following keys in sequence:
Then you can make another call.
r
2
To answer a
second call during
a call...
When a second call comes in during a call, you hear a Call
Waiting Advising Tone to inform you about the incoming second
call.
Then you can:
⇒
Put the first call in Call Hold state and switch to
the second call by pressing the following keys in
sequence:
You can toggle between the two calls by pressing
the keys in sequence.
OR
r
2
⇒
Hook on the handset to finish the first call. In this
case the call in Call Waiting state is not rejected.
It is indicated like any normal incoming call by
ringing.
OR
⇒
Do nothing, continue with the first call. After some
time - the duration depends on the network - the
second call is transferred to the voice mail box
(Call Forwarding on No Reply - CFNRy), if this
feature is enabled. Otherwise the calling party will
hang-up, because his call is not answered.
