manualshive.com logo in svg

Safe Fleet DH4C, Installation Manual

Share
Download
Safe Fleet DH4C Installation Manual Download Page 26

© Safe Fleet | 2020 | All rights reserved | Part #: 700-1213 R1

DH4C Installation Guide

p. 26

DH4C Basic Configuration

DATA ITEM

DESCRIPTION

HD Size

Primary recording media size (GB).

HD Used

Percentage of primary media storage space used. If the 

Record

 

 

Repeat Record

 setting is ON, displays "Repeating". For more 

information, see 

DH4C Configuration: Configuring Recording Settings

.

Version

Firmware version.

Status

DVR status: (LIVE=showing camera feeds, RECORD=storing video, 

V.LOSS=video loss).

Speed

Vehicle speed.

Voltage

System input voltage.

Temperature

Ambient temperature inside the DVR (F=Fahrenheit, C=Celsius).

Signals

When a signal activates, the Label is displayed. 

GPS Coordinates

Latitude/longitude, and elevation. If GPS is connected but satellite 

signals are not being received, zeros appear.

Alarm Count (AC#)

The current number (1-9) of triggered Alarms. The value resets to 0 

when the DVR restarts. For more information, see 

DH4C Configuration: 

Alarm Settings.

Ignition (IG)

Vehicle ignition state (highlighted=ignition on, dimmed=off).

Fan

Fan failure notification (highlighted=failure, dimmed=normal).

G-Sensor (GSN)

G Sensor threshold incident (highlighted=threshold exceeded). For more 

information, see 

DH4C Configuration: G Sensor Options

.

Metadata Detail

Summary of Contents for DH4C

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands