© Safe Fleet | 2020 | All rights reserved | Part #: 700-1213 R1
DH4C Installation Guide
p. 38
DH4C Advanced Configuration
To configure Advanced Settings:
1. Select
Network
Advanced
to open the tab.
2.
Configure settings as required. For details, see
Menu
Options
, below.
3. Click
Back
to save settings, then click Back again to return to
the Configuration menu.
ITEM
DESCRIPTION
VALUE [DEFAULT]
Integrated VML
(vMax Live)
Set
ON
to enable the integrated VML feature.
OFF
disables the integrated
VML feature.
[OFF], ON
LAN Range
If the customer network is outside of the DVR network: set the customer
network’s LAN range as determined by a qualified network expert.
Note: There must be a value in this field.
If not used, enter a dummy IP
address such as 10.10.0.0.
[0.0.0.0]
LAN Subnet
Mask
Set the LAN subnet mask used for the LAN Gateway Destination range as
determined by a qualified network expert. Use a value between 0 and 32.
[16]
iVML IP
Address
Enter the iVML IP Address as determined by a qualified network expert.
[172.30.2.2]
iVML Subnet
Mask
Set the subnet mask for the iVML IP Address as determined by a qualified
network expert. Use a value between 0 and 32.
[24]
Default
Gateway
Enter the Default Gateway IP address for communicating with the cellular
modem, as determined by a qualified network expert.
[172.30.2.1]
Menu Options
Configuring Advanced Settings
(
continued
)
