Safe Fleet DH4C Installation Manual Download Page 4

Page: 4 / 48

DH4C Installation Guide

p. 4

System Components

System Components

The typical installation components are listed below.

•  DH4C video recorder
•  Mounting plate and fasteners
•  Power harness (PH2X2MFJR)
•  SD card (capacity based on model purchased)

Camera Options

•

Analog High Definition cameras (HD3Q, HD3W, HD3U, HD3S, HD2Q, HD1W, HD1Q, or HD1S)

•

Analog Standard Definition cameras (CA10, CJ, CQ, or RVC)

• Camera harness (HExHD for AHD and HE or HExHD for SD)

Accessory Options

•  Adaptor harness (WT2)
•  RGY button with extension cable
•  GPS antenna (built-in GPS)
•  WIFI antenna (built-in WIFI)
•  Smart-Reach WIFI bridge
•  Smart-Reach cellular router
•  Portable video monitor

Required Tools & Equipment

The DVR system must be installed by a professional installer. A professional installer has the experience and equipment to

install and configure the components to run properly.

Check that you have all the system components and inspect the units for any scratches or damage before installing.

Keys included in package contents:

• DVR keys for securing the SD card slot.

Configuration equipment:

•

For on-screen configuration: portable video monitor and mouse.

•

For browser access configuration: laptop and an Ethernet cable.



Installation Package

The actual contents of your installation package may vary, depending on the options selected.

Summary of Contents for DH4C















































Search results

Summary of Contents for DH4C

Reviews:

Brands by name

Popular brands

Safe Fleet DH4C, Installation Manual

Search results

Summary of Contents for DH4C

Reviews:

Brands by name

Popular brands