Saeco Cristallo 600 EVO, Use And Maintenance

Page: 20 / 112

English
4
20
4 SAFETY
4.1 Introduction
In accordance with the applicable standards and
regulations, SAECO VENDING has prepared a technical
file relating to the CRISTALLO 400 and CRISTALLO 600
vending machines at its premises, acknowledging the
following standards in the design stage:
- EN 55014 - EN 61000-4-4
- EN 6100-3-2 - EN 61000-4-5
- EN 61000-3-3 - EN 61000-4-11
- EN 61000-4-2 - EN 60335-2-75
- EN 61000-4-3 - EN 60335-1
4.2 General safety regulations
It is forbidden to:
• tamper with or disable the safety systems installed on the
vending machine;
• carry out maintenance on the vending machine without
unplugging it first;
• install the vending machine on the outside. It is advisable to place
it in a dry place where the temperature does not drop below
2°C, in order to prevent any possible freezing.
• use the vending machine for purposes other than those indicated
in the sale contract and in this publication;
• use water jets to clean the vending machine.
• connect the appliance to the mains using multi-sockets or
adapters;
It is compulsory to:
• check the electrical power line for conformity;
• use original spare parts;
• read the instructions contained in this publication and in the
enclosed documents carefully;
• use personal protection devices during installation, testing and
maintenance operations;
• Use a new gasket kit every time you disconnect and then
connect again the machine to the water supply.
Precautions for preventing human errors:
• make the operators aware of safety issues;
• handle the vending machine, either packaged or unpackaged, in
safe conditions;
• have a thorough knowledge of the installation procedures, its
operation and limits;
• dismantle the vending machine in safe conditions, in accordance
with the environmental protection and health and safety laws in
force.
To prevent machining
residues from coming into
contact with the beverages,
dispense about 0.5 l water
for each dispensing path
before definitely starting
the vending machine. The
dispensed beverages can
be consumed only after
performing this operation.