Saci Pumps emotion MT2-11A, Installation And Maintenance Manual

Page: 30 / 262

30
EN
Note:
1) Loss values were determined at 4 kHz switching frequency.
2) Loss values i10% of supplement in IEC 61800-9-2.
3) Relative losses in relation to the device rated apparent power.
4 - PRODUCT IDENTIFICATION
5 - SIZE AND WEIGHT
6 - STORAGE
The product must be stored in a covered and dry place, away from sources of heat and protected from dirt and
vibrations, moisture, heat sources and possible mechanical damage. Do not place heavy objects on top of the
packaging.
7 - INSTALLATION AND ASSEMBLY
Before installing the inverter, carefully read the whole of this manual and consult the safety regulations in force in
the country in which it will be used.
The installation must be carried out by a qualified technician.
a) Installation of the inverter:
- It must be installed in a well ventilated area, protected from damp and direct exposure to the sun and rain.
- Before making the electrical connections, ensure the cable used to provide power to the Inverter is not live.
- Carefully verify the electrical data indicated in the specifications plate of the Inverter before connecting the electric
current.
- The electric power cables to the Inverter, and from the Inverter to the pump, must be of the correct size for the
nominal consumption of the motor and the length of cable required, according to the regulations in force in the
3,5 Kg
3,5 Kg
7,1 Kg 0,013 m
3
0,013 m
3
0,020 m
3
330x230x170
330x230x170
330x295x210 2,8 Kg
2,8 Kg
6,4 Kg 0,0063 m
3
0,0063 m
3
0,017 m
3
230x183x149
230x183x149
316x276x198
Weight Volume Dimensions
Speed Drive Speed Drive Speed Drive Packaging Packaging Packaging
Product
family
Maximum motor
current
Inverter power supply: M=Single
phase T=Three phase
Motor output:
T=Three phase
E - M O T I O N M T 2 - 1 1 A
[e]motion MT2-11A
[e]motion TT3-11A
[e]motion TT3-30A