Saci Pumps emotion MT2-11A, Installation And Maintenance Manual

Page: 41 / 262

EN
41
EN
1. PARAMETERS 2. DISPLAY 3. LOG 4. MANUAL 5. ADVANCED PARAMETERS 6. FINE TUNING
1.1 PRESSURE SETPOINT
2.01 MODULE
TEMPERATURE
5.01 LANGUAGE
5.42 RELAY OUTPUT 2
6.01 PROPORTIONAL
CONSTANT
5.12 MAIN PUMP STOP
DELAY
5.54 DRY RUNNING ALARM
ACTIVE
6.10 ALARMS RESET
5.08 MINIMUM WORKING
FREQUENCY
5.46 SCHEDULE
OPERATION 2
6.06 SPEED OF STOP
MANEUVRE
5.16 CHANGEOVER TIME
5.59 MOTOR THERMISTOR
TYPE
5.23 PRESSURE IN 2
5.64 FACTORY DEFAULT
RESET
5.04 TRANSD. PRESSURE
MIN VALUE (4mA)
5.44 PROGRAM START
TIME 1
6.04 SWITCHING
FREQUENCY
5.14 AUXILIARY START
DELAY
5.57 BURST PIPE ALARM
5.10 PROPORTIONAL
BOOST
5.48 PROGRAM STOP
TIME 2
6.08 MODBUS BAUDRATE
5.18 DIGITAL INPUT 1
5.61 PARAMMETER LOCK
5.27 PRESSURE IN 3
5.35 SLAVE 1V PRESSURE
SETPOINT
5.02 UNITS OF PRESSURE
5.43 SCHEDULE
OPERATION 1
6.02 INTEGRAL
CONSTANT
5.13 AUXILIARY START
FREQUENCY
5.56 DRY RUNNING ALARM
DELAY
6.11 RESET NUMBER OF
START-UPS
5.09 MAXIMUM WORKING
FREQUENCY
5.47 PROGRAM START
TIME 2
6.07 MODBUS ADRESS
5.17 PUMP KICK INTERVAL
5.60 MOTOR THERMISTOR
TRIGGER LEVEL
5.26 DIGITAL INPUT 3
5.31 PRESSURE IN 4
5.05 TRANSD. PRESSURE
MAX VALUE (20mA)
5.45 PROGRAM STOP
TIME 1
6.05 STOP MANEUVRE
FREQUENCY
5.15 AUXILIARY STOP
DELAY
5.58 VOLTAGE ALARM
ACTIVE
5.22 DIGITAL INPUT 2
5.63 STOP FREQUENCY
SEARCH WIZARD
5.11 MAXIMUM NUMBER
OF PUMPS ON
5.49 OVERPRESSURE
ALERT LEVEL
6.09 MODBUS PARITY
5.19 PRESSURE IN 1
5.62 SET DATE AND TIME
5.30 DIGITAL INPUT 4
5.36 SLAVE 9V PRESSURE
SETPOINT
5.41 RELAY OUTPUT 1
2.09 DIGITAL INPUT 1
1.6 STOP FREQUENCY 2.4 0-10V INPUT
2.12 DIGITAL INPUT 4
1.4 MOTOR CURRENT
2.02 ANALOGUE
SIGNAL 1
2.10 DIGITAL INPUT 2
1.7 START-UP
DIFFERENTIAL
2.05 MOTOR
THERMISTOR
2.13 RELAY OUTPUT 1
2.07 HOURS WORKED
2.15 SOFTWARE VERSION
1.5 ROTATION
DIRECTION
2.03 ANALOGUE
SIGNAL 2
2.11 DIGITAL INPUT 3
2.06 VOLTAGE
HOURS
2.14 RELAY OUTPUT 2
2.08 START-UP NUMBER
2.16 POWER CONS.
OF PUMP
2.17 POWER CONS. OF
NETWORK
13 - SETUP MENU