LED
Status, Link/ACT LED
Hot swapping
Supported
Power consumption
<77W
EMC standards
GB9254-2008
Safety standards
GB4943-2011
Operating
temperature
0-50°C
Storage
temperature
-40-70°C
Operating humidity
10%-90% RH (non-condensing)
Weight
Net weight: about 3.2KG
Dimensions
436 x 346 x 45 (L x W x H, mm)
The M12000-24GT/12SFP-EA service card's 12 back ports are fiber/copper combo ports. Each SFP port is
corresponding with a combo 10/100/1000BASE-T port. Only one port can be used at a time. The automatic
MDI/MDI-X identification function of the 10/100/1000M electric port takes effect only when auto-negotiation is
enabled.
The M12000-24GT/12SFP-EA supports 1000BASE-X and 100BASE-FX modes. Please configure the ports
according to the Ruijie Networks configuration manual.
M12000-04XFP-EA
Module Appearance
Figure 1-16 Appearance of the M12000-04XFP-EA
External Interface
The M12000-04XFP-EA provides four 10000M XFP ports. The XFP optical module supports hot swapping.
LED
LED
Identification on
the panel
Status
Definition
Off
The module is not powered on.
Solid red
The module fails.
Blinking green
The module is being initialized. If it keeps
blinking, the module may be faulty.
System LED
Status
Solid green
The initialization has finished and the switch
starts working.
Off
The port link is not up.
Solid green
The device is connected to the 10G port.
XFP port LED
Link/ACT
Blinking
The port is sending and receiving data.
Specifications
Model M12000-04XFP-EA
Port type
It provides four 10000M XFP ports.
Transmission
10GBASE-SR(850nm)
Multi-mode optical fiber
