Blinking
green
The module is being initialized. If it keeps blinking, the
module may be faulty.
Solid green
The initialization has finished and the switch starts
working.
Solid green
Switching mode
Mode LED
Mode_Led
Solid yellow
PoE mode
Off
The port link is not up.
Solid green
The device is connected to the 1000M port.
Solid yellow
The device is connected to the 10M or 100M port.
RJ45 port LED in the
switching mode
(Mode-Led light on in green)
Link/ACT
Blinking
The port is sending and receiving data.
Off
No external PoE power supply on the port
Solid green
External PoE powering is performed on the port.
Solid yellow
The PoE powering is overloaded on the port.
RJ45 port LED in the PoE
mode
(Mode-Led light on in
yellow)
Link/ACT
Solid red
The PoE powering fails on the port.
Off
The port link is not up.
Solid green
The device is connected to the 1000M port.
Solid yellow
The port link is up at 100Mbps.
SFP port LED in the
switching mode
(Mode-Led light on in green)
Link/ACT
Blinking
The port is sending and receiving data.
SFP port LED in the PoE
mode
(Mode-Led light on in
yellow)
Link/ACT
Off
No external PoE power supply on the port
Specifications
Model M12000P-48GT/4SFP-EA
Port type
M12000P-48GT/4SFP-EA provides 44 10/100/1000BASE-T RJ45 ports and four fiber/copper
combo ports and supports 48 PoE ports at most.
Transmission
medium
1000BASE-SX(850nm)
Multi-mode optical fiber
1000BASE-LX(1310nm)
Single-mode optical fiber
1000BASE-LH40(1310nm)
Single-mode optical fiber
1000BASE-ZX(1550nm)
Single-mode optical fiber
100BASE-FX(1310nm)
Multi-mode or single-mode optical fiber
100BASE-FX(1550nm)
Single-mode optical fiber
10/100/1000BASE-T
Cat-5 UTP
LED Status,
Link/ACT
Hot swapping
Supported
Power
consumption
<121W+15.4×N (N indicates PoE ports being used, N<=48)
EMC standards
GB9254-2008
Safety standards GB4943-2011
Operating
temperature
0-50°C
Storage
temperature
-40-70°C
Operating
humidity
10%-90% RH (non-condensing)
Weight
Net weight: about 3.8KG
Dimensions
436 x 346 x 45 (L x W x H, mm)
The M12000P-48GT/4SFP-EA service card's four back ports are fiber/copper combo ports. Each SFP port is
corresponding with a combo 10/100/1000BASE-T port. Only one port can be used at a time. The automatic
MDI/MDI-X identification function of the 10/100/1000M electric port takes effect only when auto-negotiation is
enabled.
