BOOTROM 8MB
Flash Memory
512MB
SDRAM
2GB
External Interface
One console port for management, one 10/100/1000M MGMT port, one SD port, and one USB
port
Button
1 RESET button
Power consumption
<91W
Hot swapping
Supported
Management
redundancy
Supported
EMC standards
GB9254-2008
Safety standards
GB4943-2011
Operating
temperature
0-50°C
Storage
temperature
-40-70°C
Operating humidity
10% to 90% RH (non-condensing)
Weight
Net weight: about 2.8KG
Dimensions
436 x 346 x 30 (L x W x H, mm)
The M12000-CM adopts the CR2032 lithium battery. The device may explode if a wrong battery model is
used. Used batteries should be properly disposed of.
M12000-CM III
The M12000-CM III is the management engine module of the RG-S12000 switches and is designed with management
and switching functions.
Module Appearance
Figure 1-10 Appearance of the M12000-CM III
External Interface
The M12000-CM III module provides four external interfaces:
USB interface: By connecting to the USB interface, USB storage devices can store logs, host version, alarms and
other diagnosis information, facilitating online upgrade of switch software and storage of logs.
To secure data and prevent damage to the device, it is recommended to use high-quality flash disks
produced by reliable manufacturers. The USB interface is compatible with most USB controllers but may be
unable to identify some USB disk models.
SD (Secure Digital Memory Card) interface: By connecting to the SD interface, SD memory cards can store logs, host
version, alarms and other diagnosis information, facilitating online upgrade of switch software and storage of logs.
To secure data and prevent damage to the device, it is recommended to use high-quality SD memory cards
produced by reliable manufacturers. The SD interface is compatible with most SD memory cards but may be
unable to identify some SD memory cards.
