9
3. Operating instructions
3.1 Switching on the machine
To start the machine......
......the main switch has to be turned to position ”1”
......a trolley with a box has to be pushed under the cutting area door.
........the discharge funnel has to be installed inside the cutting area door.
......with a Multi-cutter installed, the shaft slider and the
cutting area door have to be closed.
......The ”ON” key on the operating panel has to be
activated.
Now the machine can be started, provided, that the Multi-cutter, prescribed in the
cutting program, has been inserted.
3.2 Cutting preperation
The machine has to be adjusted to the product prior to the cutting process.
The adjustment consist of inserting the correct multi grid combination, choosing
The right cutting length (forward feed length) and the best pre-compacting
Pressure. Pre-compacting has the funktion to press the product into a compact
Block inside the process chamber before the actual cutting process. Each product
Can only sustain a certain amount of pressure without beeing damaged.
Cutting Length:
With the forward feed adjusting lever it is
possible to choose cutting lengths between
1 mm and 30 mm.
To adjust the length the lever has to be
pulled away from the machine and turned
to the desired position.
Releasing the lever lets it slide back on to the
machine again.
Summary of Contents for SR1 turbo
Page 5: ...5...