Ruhle SR1 turbo, Operating Manual, Page: 29 / 30

29
6. Technical documentation
Technical data
Current: Three-phase current
Voltage: 400 V AC
Control voltage: 24 V DC
Current: 16 A
Power input: 1,5 kW
Should these data not confirm with the data on the data
plate, then the values of the data plate apply. For safety
reasons check the data with the manufacturer and get
written confirmation.
The data plate is positioned under the main switch on
the back side of the machine.
Compressed air suitable for food according to DIN ISO 8573-1
Oil: Class 1 / Particle: Classe 1 / Water: Classe 4
Power plug: CEE-Plug 16 A , 5 - poles
Working place noise level under 65 dBa
6.1 Circuit diagrams
The circuit diagrams of your High-Tech-Cutter SR 1 and SR1 turbo are supplied together with the
machine. These diagrams are kept inside the switch box, in order to have them handy for the
service technician. In case of reselling the machine, the circuit diagrams have to be handed over as
well.
6.2 List of spare parts
The High-Tech-Cutter SR1 and SR1 turbo is only allowed to be serviced by Rühle service technicians
and by authorised persons. These persons have all the necessary information and a list of spare
parts for the machine.
Damage to parts is usually not caused by the part itself – that’s why a fault diagnosis has to be
carried out. For this reason, there is no list of spare parts included, because non-qualified repairs can
do more harm than good..
In case of damage to the machine or a spare part, write down the machine type and machine
number, call +49 7748 – 523-0 and we will help you find the fault and send you the right spare
parts.
Typ
Anschlußwert
Nr. Baujahr
CE
SR 1 (turbo)
2001 9999
400 V/50 Hz/16 A/3/1,5 kw