32 Installation
Zeus III
Bosch Security Systems, Inc.
Technical Manual
F.01U.193.289
Rev. 05
Initial Power Up
To
power on the Zeus III unit
, do the following:
1.
Attach the
power cord
to the power entry module on the rear of the Zeus III.
2.
Plug the
other end of the power cord
into the electrical outlet.
The unit powers on. The Status LED, located on the front panel (see Figure 2 on page 12), cycles through a three (3)
color sequence as it verifies the Zeus III is working properly. The LED color cycle starts with Red, goes to Orange,
and ends with Green.
NOTE:
Repeat
step 1
and
step 2
for redundant power supplies.
FIGURE 22.
Apply power to the Zeus III.
Summary of Contents for Zeus III
