RTS Zeus III, User Manual

Page: 12 / 70

12 Introduction Zeus III
Bosch Security Systems, Inc. Technical Manual F.01U.193.289 Rev. 05
Indicators and Controls
Status LEDs
When the Zeus III powers on each time, the Status LED, located on the front panel (see Figure 2), cycle through a three (3)
color sequence as it verifies the Zeus III is working properly. The LED color cycle starts with Red, goes to Orange, and ends
with Green.
Red - System Malfunction
Orange - Boot Load Mode
NOTE: If Switch S1-7 is set to ON (Force Boot Loader Mode, see Table 9 on page 20) and the Zeus III unit is
powered on, the LED stays at the Orange level of the color cycle, indicating you are in boot loader
mode.
Green - Normal Operation
Red LED Orange LED Green LED
FIGURE 2.
Red LED Status, Orange Status, and Green Status Indicator