RTS Zeus III, User Manual

Page: 39 / 70

Zeus III Installation 39
Bosch Security Systems, Inc. Technical Manual F.01U.193.289 Rev. 05
To configure the Zeus III for Ethernet configuration using the CAT-5 crossover cable , do the following:
By default, Zeus III is shipped with the IP Address 192.168.0.9 and the Network Mask 255.255.255.0. To change the IP
Address, you must initially connect either serially or via USB. For crossover cable construction, see Figure 21 on page 29.
NOTE: If access to serial port and USB is not available on the host PC, you must configure your TCP/IP properties on
the PC to match the Zeus III unit subnet (192.168.0.X) for proper communication.
1.
Using the CAT-5 crossover cable, attach one end to the Ethernet connector located on the rear of the Zeus III.
2.
Attach the other end of the crossover cable to an Ethernet port on the computer with AZedit loaded.
3.
In AZedit, from the Options menu, select Communications .
The Communications window appears .
FIGURE 30.
Crossover Cat-5 Connection
FIGURE 31.
Communications Window – CAT-5 Crossover Cable