18 Introduction
Zeus III
Bosch Security Systems, Inc.
Technical Manual
F.01U.193.289
Rev. 05
Dip Switches
To
access the dip switches in the Zeus III unit
, do the following:
1.
Using a Phillips head screwdriver, remove the
four (4) top screws
(see Figure 7).
2.
Remove the
three (3) screws located on the right-side
of the unit.
3.
Remove the
three (3) screws located on the left-side
of the unit.
4.
Carefully remove the
top cover panel
and set it to the side.
5.
Using Figure 8, locate the
dip switch
you want to configure.
6.
Using Table 9 on page 20 or Table 10 on page 21, configure the
dip switch
as required.
FIGURE 7.
Screw locations on the Zeus III unit
Summary of Contents for Zeus III
