RTS Zeus III, User Manual

Page: 11 / 70

Zeus III Introduction 11
Bosch Security Systems, Inc. Technical Manual F.01U.193.289 Rev. 05
Specifications
NOTE: It is recommended to mount the Zeus III with a
half inch (1/2”) spacing on the top and bottom of
the unit to allow for proper air flow.
MATRIX
Description :
32 keypanel ports, 2-party line ports with call
signaling
Conversion :
48.0kHz, 24-bits
Programming :
AZedit via Windows
Memory :
Non-volatile Flash
Communication :
USB and Ethernet interface
AUDIO PERFORMANCE
Keypanel Ports
Signal Type:
Balanced
Nominal Level:
8dBu
Maximum Level:
20dBu
Input Impedance:
22k

Output Impedance:
600

SNR at 20dBu(A-weighted):
>85dB
THD+N at 20dBu, 1kHz (unweighted):
<0.007%
Frequency Response at 20dBu:
within ±1dB from 50Hz - 20kHz
Crosstalk at 20dBu:
< -80dBu
Note : All measurements performed using an Audio Precision
System 1 Dual Domain System at f=1kHz and Level=20dBu.
Measurement bandwidth= 20Hz to 20kHz.
Party Line Ports
Nominal Operating Levels:
Audiocom: 1 VRMS
RTS/TW/ClearCom: 775mVRMS
Nominal Input/Output:
5k

Frequency Response:
200Hz to 3.5kHz, ±4dB
THD:
<1% at channel output with nominal input
DATA PORTS
Keypanel Data Ports
RS485 with dedicated transceivers for every port.
Peripheral Data Port
RS485 for GPIO-16/LCP-102
Trunk Port
RS485 for Trunking
PC Port
RS232 for AZedit (supports CPL)
USB Port
USB for AZedit
Ethernet Port
10/100Mbps for remote AZedit
Call Signals:
Balanced :
Receive:
20kHz ±100Hz, 100mVrms
Send:
20kHz ±100Hz, 500mVrms
RTS Channel 1 and Channel 2
Receive:
20kHz ±100Hz, 100mVrms
Send:
20kHz ±200Hz, 350mVrms
ClearCom (Unbalanced) (DC-call)
Receive:
4VDC
Send:
12VDC
Controls
Reset Switch :
Accessible from the front panel; recessed.
Power Requirements
AC Input :
90-264VAC 50/60Hz
Power Consumption
42 Watts (Full Load)
Physical Dimension
1.72” H x 19” W x 15” D
(4.37cm H x 48.26cm W x 38.1cm D)
Weight
7.0lbs (3.18kg)