RTS Zeus III, User Manual

Page: 35 / 70

Zeus III Installation 35
Bosch Security Systems, Inc. Technical Manual F.01U.193.289 Rev. 05
USB Configuration
IMPORTANT: If you are configuring a USB connection for the first time, you must download the drivers (either 32-bit
or 64-bit) from www.rtsintercoms.com/. The drivers are located under Documents and Downloads in
Software - USB 32Bit or USB 64Bit.
Since this is a .zip file,
• extract the AZeditUSB32.exe file to C:\Telex\AZedit\USB on your computer
• run the executable.
To configure the Zeus III for USB configuration , do the following:
1.
Attach the supplied USB cable to the USB connector located on the front of the Zeus III.
2.
Attach the other end of the USB cable to any available USB connector on the computer with AZedit loaded on it.
FIGURE 25.
USB Connector