Royal Alpha 583cx Instruction Manual Download

Page: 86 / 139

Chapter 8: Running Reports

Alpha 583cx User’s Guide

Running PLU Reports

The PLU report shows the quantity and cost of each PLU Number rung up.
Only PLUs that had sales will print.

Important

A PLU Reading must be closed out in the Z position.

To print a PLU report

Put the Z or PRG key in the Mode key slot and turn it to the X or Z
position.

If you are prompted for a Manager Password, type the password number
and then press the

Check

key. If you did not program a Manager

Password, go to the next step.

Press the

PLU

key.

To print a PLU sales report, according to an assigned Department number
range

Put the Z key or the PRG key in the Mode key slot and turn it to the X
position.

If you are prompted for a Manager Password, type the password number
and then press the

Check

key. If you did not program a Manager

Password, go to the next step.

In the round Number keys area, specify the Starting Dept Number. It
must be 2 digits; for example

Enter the Ending Dept Number as 2 digits.

Press the

PLU

key. The sales history for the PLUs assigned to the

departments in the specified range prints.

Summary of Contents for Alpha 583cx












































































































































Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands

Royal Alpha 583cx, Instruction Manual

Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands