background image

 Alpha 583cx  User’s Guide

53

 Programming Discounts

If large number of digits is entered, you hear an error beep and the 
keypad locks up. For example: To make sure no one can ring up more 
than $99.99 on the Coupon Discount key, set the HDLO to 4.

2

Setting the Tax Status.
The tax status determines how you want the tax rate to be charged when 
using the Coupon Discount key. Contact your local tax authorities to learn 
your local tax requirements. 

The options are:

• To charge tax on the original amount of an item (the amount before the 

coupon is deducted).

• To charge tax on the discounted amount of an item (the amount after 

the coupon discount is deducted).

Note

If you have no tax rate programmed in the cash register, use 00 from the Tax 
Status Numbers table. 

The following Tax Status numbers are used to link the Tax Status to the 
Coupon Discount key. 

Table 15   High digit lockout number (HDLO) 

This number... 

From this...

to this...

0

$ .01

$ 99,999.99 (Standard setting)

1

.01

.09

2

.01

.99

3

.01

9.99

4

.01

99.99

5

.01

999.99

6

.01

9,999.99

Table 16   Tax Status Numbers   

Number

Taxable by...

To charge the...

00

Non-Taxable 

If no tax is programmed in the cash register, or 

If you want to charge tax on the original 
amount of an item (the amount before the 
coupon is deducted).

01

TAX 1

TAX 1 rate on the discounted amount of an 
item. *

02

TAX 2

TAX 2 rate on the discounted amount of an 
item. *

Summary of Contents for Alpha 583cx












































































































































Reviews: