Royal Alpha 583cx Instruction Manual Download

Page: 107 / 139

Alpha 583cx User’s Guide

101

Multiplying By A Fraction

In the Number keys area, press

100

, and then press the

key.

Press the

key.

Note

You can use from .01 to 999.99 when ringing up the quantity of an item.

Multiplying By A Fraction

Example 40:

Multiply the quantity of 1.25, as in 1¼ yards of fabric at $1.00 per

yard in Department 1.

Caution

When multiplying by a fraction, you must use the decimal point in the
fraction but not in the dollar amount.

To multiply an item by a fraction

In the Number keys area, press

1.25

, and then press the

key.

In the Number keys area, press

100

, and then press the

key.

Press the

key.

Note

You can use from .01 to 999.99 when ringing up the quantity of an item.

No-Sale Function

Example 41:

Used to open the drawer without ringing up a sale. For example,

to give change.

To use the No Sale function

▼

Press the

key. The cash register drawer opens.

Note

The number of times the No-Sale key is used appears on the Management
Reports. For more information about these reports, see Running
Management Reports on page 73.

Summary of Contents for Alpha 583cx












































































































































Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands

Royal Alpha 583cx, Instruction Manual

Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands