Royal Alpha 583cx Instruction Manual Download

Page: 81 / 139

Alpha 583cx User’s Guide

Running Management Reports

About Management Reports

The following management reports are available:

• Cash-in-Drawer Report - Only available in the X position. Tells you how

much cash is in the drawer at the time of the report.

• Clerk Report - Prints total sales amounts of each Clerk Number.

• Financial Report - Includes totals of departments, tax, net sales, voids,

returns, coupons, refunds, minus percentage, plus percentage,
receipts-on-account, paid out, cash, check, charge. The running grand
total appears only on Z Reports.

• Hourly Report - Provides total sales amounts rung up each hour.

• All PLU Report - Lists quantity and cost of each PLU number rung up.

• Department Range Report - Shows the sales information for the specified

departments.

The different management reports available in the X and Z positions:

Running a Cash-In-Drawer Report

This report shows how much cash is in the cash drawer.

To run a Cash-In-Drawer report

Put the Z key or the PRG key in the Mode key slot and turn it to the X
position.

If you are prompted for a Manager Password, type the password number
and then press the

Check

key. If you did not program a Manager

Password, go to the next step.

Press the

Qty/Date

key. The Cash in Drawer report prints.

This key
position...

Prints this
report
symbol...

This report is available...

This report is
also known as...

Financial, PLU,
Department Range, Clerk,
Hourly, Cash-In-Drawer

Mid-Day

Financial

Mid-Week or
Mid-Month

Financial, PLU, Clerk,
Hourly

End-Of-Day or
Daily-Close-out

Financial

Weekly or
Monthly

Summary of Contents for Alpha 583cx












































































































































Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands

Royal Alpha 583cx, Instruction Manual

Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands